Sawn timber is cut from logs into various shapes and sizes. Sawn timber is commonly cut into varying rectangular widths and lengths, however, may also be wedge-shaped. Regular sawn timber items include solid timber beams and more rectangular timber sections.
When it comes to choosing the correct timber for your construction work or project, you are likely here because you are tossing up between dressed timber and rough sawn timber. There are many advantages to going with either, and it is critical to remember that each has its general qualities. Based on the kind of task you require the timber for and how visible it will be, soon you will have a smart thought of which one is right for you. Fortunately, there are numerous incredible dressed and rough sawn timber providers. To settle on your choice simpler, we have made this post with data on each respective cut of timber.
Rough sawn timber is also known as a timber that is cut of logs into various shapes and sizes. It is timber that has been sawn and dried preceding treatment, but not afterwards. This sort of procedure leaves you with a delightfully rustic looking timber that remaining parts in one of its rawest possible forms. You would likely need to consider using rough sawn timber if need a material for solid timber pillars and rectangular timber sections.
Dried dressed timber is known as a more premium completion. This timber isn’t crude and is dressed on all sides, creating a much smoother finish. The drying is done after treatment to decrease shrinkage also. This timber is perfect for circumstances that require a progressively finished look. Decks, outdoor areas, and pergolas are some of the examples.
If you would like to get either dressed , rough or any kind of sawn timber for your construction work or project, it’s best to source it from the experts in the business. We offer some of the best service and materials in your home town. Call us!
Sawing patterns
Each cutting pattern produces timber with a particular appearance and character. Each type has its pros and cons.
Quarter sawn timber
It is also called quarter cutting, with quarter sawn timber the development rings are corresponding to the short face. The long face of each board is near to a radial face. Countless development rings can be seen on this face. Quarter sawing timber is best for hardwood species that are prone to crumple during drying.
Back sawn timber
Otherwise called back cutting and tangential cutting, back sawing is the most well-known sawing technique used in some countries. Back sawing assists with acquiring high-grade timber from logs.
Most basic timber and numerous appearance products are back sawn. With back sawn timber, the long face and short face is close to a tangential face and radial face.
This cut offers greater flexibility in that very enormous sheets can be back sawn from the wings of logs. Here the most extreme depth can be just less than the diameter of the log.
Radial sawn timber
This cut isn’t normal, and whenever required would require special negotiation with the factory. In any case, radial sawing has a efficiency that different cuts can’t accomplish and utilizes a log.
As a result of the cutting pattern, each piece of radially sawn timber is a wedge shape. It has sapwood on the more extensive edge and pith at the point.
As real logs are not superbly round and straight. This information can make for interesting architectural utilization of the timber. It is mainly used for external applications such as cladding, decking , timber screens etc.
If you would like to get either dressed , rough or any kind of sawn timber for your construction work or project, it’s best to source it from the experts in the business. We offer some of the best service and materials in your home town. Call us!
